DDS.STUDIO

Oral surgery floor plan

Oral Surgery Office Floor Plan: Surgical Suites And Recovery.

For an oral surgery practice of 2,400 sq ft, DDS.STUDIO draws 5 operatories and one to add later, with sterilization, a pano / CBCT room and a consult room, to be turned into surgical suites. A surgical chair is 3 × 6.5 ft and needs 8 × 8.5 ft of floor with its working space.

Updated

  • 8 × 8.5 ftA surgical chair, with its clearance
  • 3D X-ray (CBCT)5 × 5.5 ft
  • 2,400 sq ft5 chairs plus 1 to add later

What does DDS.STUDIO draw for oral surgery?

Setup describes oral surgery as "Surgical suites and recovery". This is its starting plan in a stand-alone building.

OPERATORY 1OPERATORY 2OPERATORY 3STERILIZATIONPANO / CBCTMECHANICALCONSULTOPERATORY 4OPERATORY 5FUTURE OP 1IT CLOSETWAITINGRECEPTIONRESTROOMDOCTOR OFFICEBREAK ROOM57'-0"
The starting plan for oral surgery. A stand-alone suite of 2,400 sq ft, 57 × 42 ft, with 5 chairs and 1 to add later, as setup draws it in its first layout ("Halls across, waiting on the left"). Every room can be moved and resized.
Rooms in the starting plan above
RoomSizeArea
Break room11 × 10.5 ft116 sq ft
Consult11 × 11 ft121 sq ft
Doctor office10 × 10.5 ft105 sq ft
IT closet7 × 11 ft77 sq ft
Mechanical7 × 10.5 ft74 sq ft
Pano / CBCT7 × 10.5 ft74 sq ft
Reception12 × 10.5 ft126 sq ft
Restroom8 × 10.5 ft84 sq ft
Sterilization13 × 10.5 ft137 sq ft
Waiting16 × 10.5 ft168 sq ft
Future op 111 × 11 ft121 sq ft
Operatory 110 × 10.5 ft105 sq ft
Operatory 210 × 10.5 ft105 sq ft
Operatory 310 × 10.5 ft105 sq ft
Operatory 411 × 11 ft121 sq ft
Operatory 512 × 11 ft132 sq ft

How much floor does each chair need?

Plan each surgical suite around the surgical chair, and leave room for a monitor and an emergency cart beside it.

From the Studio's equipment catalogue
ChairFootprintClear floor around itFloor it needs
Surgical chair3 × 6.5 ft2 ft 6 in each side, 1 ft behind, 1 ft in front8 × 8.5 ft

What should you change for oral surgery?

  • Surgical suites. Widen the operatories and swap in the surgical chair.
  • Recovery. The plan has no recovery room of its own kind: add a room and name it Recovery in the inspector.
  • Equipment. A Patient monitor and an Implant motor cart (1.5 × 1.5 ft), an Emergency cart (2 × 1.5 ft) with 2 ft clear in front, and a N₂O / O₂ manifold in the mechanical room.
  • Imaging. A 3D X-ray (CBCT) is 5 × 5.5 ft and needs 1 ft 6 in clear in front.

What does Plan check look for?

The same advice for every specialty, from the Studio's own rules. It points things out; it never blocks a plan.

  • An operatory under 70 sq ft or over 200 sq ft is pointed out; 90 to 130 sq ft is usual.
  • From 4 operatories, about 12 ft of sterilization counter.
  • Swing doors at least 3 ft wide, and open floor of at least 3 ft 8 in between facing walls.
  • A restroom at least 5 ft each way inside, for a 5 ft turning circle.
  • 1 ft clear round a compressor, a vacuum pump or a separator tank.

Other specialties

These are planning values, not building code or manufacturer specifications. A plan made in DDS.STUDIO is a concept plan, not construction documents. Confirm every dimension with your architect, your equipment supplier and your local code official before you build.

How much space does an oral surgery suite need?

Start from the surgical chair: in DDS.STUDIO's catalogue it needs 8 × 8.5 ft with 2 ft 6 in clear each side, before cabinets, a monitor and a cart.

Can I add a recovery room?

Yes. Add a room, size it, and name it Recovery in the inspector. It is drawn and checked like any other room.