DDS.STUDIO

Orthodontics floor plan

Orthodontic Office Floor Plan: Bays, Chairs And Sizes.

For an orthodontic practice, DDS.STUDIO names the chairs bays and draws them as separate rooms to start with: 5 bays and one to add later in 2,400 sq ft, with a pano / CBCT room for records. An orthodontic chair is 2 × 5.5 ft and needs 5 × 6.5 ft of floor with its working space, so bays can sit closer than general operatories once the walls between them come out.

Updated

  • 5 × 6.5 ftAn orthodontic chair, with its clearance
  • BaysWhat the plan calls the chairs
  • 2,400 sq ft5 chairs plus 1 to add later

What does DDS.STUDIO draw for orthodontics?

Setup describes orthodontics as "Open bay and records". This is its starting plan in a wide bay.

IT CLOSETSTERILIZATIONPANO / CBCTFUTURE OP 1BAY 1BAY 2BAY 3BAY 4BAY 5RECEPTIONWAITINGCONSULTRESTROOMDOCTOR OFFICEBREAK ROOMMECHANICAL69'-0"
The starting plan for orthodontics. A wide bay suite of 2,400 sq ft, 69 × 35 ft, with 5 chairs and 1 to add later, as setup draws it in its first layout ("Hall front to back, waiting on the left"). Every room can be moved and resized.
Rooms in the starting plan above
RoomSizeArea
Break room11 × 9.5 ft105 sq ft
Consult9 × 9.5 ft86 sq ft
Doctor office9 × 9.5 ft86 sq ft
IT closet13.5 × 6 ft81 sq ft
Mechanical6 × 9.5 ft57 sq ft
Pano / CBCT13.5 × 9 ft122 sq ft
Reception15 × 9.5 ft143 sq ft
Restroom8 × 9.5 ft76 sq ft
Sterilization13.5 × 12 ft162 sq ft
Waiting11 × 9.5 ft105 sq ft
Bay 113.5 × 10 ft135 sq ft
Bay 213.5 × 12 ft162 sq ft
Bay 313.5 × 9 ft122 sq ft
Bay 413.5 × 12.5 ft169 sq ft
Bay 513.5 × 9.5 ft128 sq ft
Future op 113.5 × 13 ft176 sq ft

How much floor does each chair need?

The catalogue's orthodontic chair is narrower than a patient chair, with 1 ft 6 in clear each side instead of 2 ft.

From the Studio's equipment catalogue
ChairFootprintClear floor around itFloor it needs
Orthodontic chair2 × 5.5 ft1 ft 6 in each side, 0 ft 6 in behind, 0 ft 6 in in front5 × 6.5 ft
Patient chair2.5 × 6 ft2 ft each side, 0 ft 6 in behind, 0 ft 6 in in front6.5 × 7 ft

What should you change for orthodontics?

  • Open the bay. Select a wall between two bays and remove it; the Studio leaves a faint dashed line so it can be put back. With the walls gone, the bays become one open room.
  • Swap the chairs. Replace each patient chair with the orthodontic chair, from Chairs in the Equipment tab.
  • Records. The catalogue has a Pan-ceph X-ray (7 × 4.5 ft) as well as a Panoramic X-ray (4 × 5 ft) for the imaging room.
  • Keep one closed room. Leave one bay with its walls for consults or a patient who needs privacy.

What does Plan check look for?

The same advice for every specialty, from the Studio's own rules. It points things out; it never blocks a plan.

  • An operatory under 70 sq ft or over 200 sq ft is pointed out; 90 to 130 sq ft is usual.
  • From 4 operatories, about 12 ft of sterilization counter.
  • Swing doors at least 3 ft wide, and open floor of at least 3 ft 8 in between facing walls.
  • A restroom at least 5 ft each way inside, for a 5 ft turning circle.
  • 1 ft clear round a compressor, a vacuum pump or a separator tank.

Other specialties

These are planning values, not building code or manufacturer specifications. A plan made in DDS.STUDIO is a concept plan, not construction documents. Confirm every dimension with your architect, your equipment supplier and your local code official before you build.

How much space does an orthodontic chair need?

In DDS.STUDIO's catalogue, an orthodontic chair is 2 × 5.5 ft and needs 5 × 6.5 ft of floor with 1 ft 6 in clear each side.

Can DDS.STUDIO draw an open bay?

Yes. It starts with separate bays; remove the walls between them to make one open bay. Removed walls can be put back.